Tiny85 GND and VCC port unable to hook up

#1 · June 18, 2024, 11:14 am

Building a little circuit using the Tiny85, a switch and a couple of LEDs. Perhaps I am not understanding things correctly but I do not seem to be able to hook anything up to the VCC and Gnd ports. I am wishing to add a switch in series to turn on/off my very simple circuit.

Attached is my circuit.

Thanks in advance.
Glyn

Rabotanema has reacted to this post.

#2 · June 18, 2024, 12:28 pm

Hi.
By now Vcc and Gnd pins are not used.
You can just turn on/off the simulation.