Gigavolt Power Plant)
No need to do anything, the electricity will be generated by itself)
From an image it is difficult to say.
Can you share your circuit?
File)
Uploaded files:
FileForThis
$ 1 0.000005 0.0453089017280169 50 5 50 5e-11
c 224 80 224 144 4 1e-11 7.581617771556651e-36 0.001 0.1
c 224 144 224 208 4 1e-11 7.581649406542881e-36 0.001 0
R 96 80 64 80 0 0 40 5 0 0 0.5
s 96 80 160 80 0 1 true
c 160 96 160 144 4 1e-8 4.469988838397307 0.001 0.1
g 160 144 160 160 0 0
s 160 80 224 80 0 1 true
g 224 272 224 288 0 0
c 224 208 224 272 4 1e-11 7.581649406540727e-36 0.001 0
s 224 80 288 80 0 1 true
g 288 80 288 96 0 0
p 96 144 96 208 3 0 0 10000000
w 96 144 160 80 0
w 96 208 160 144 0
w 160 80 160 96 0
w 288 192 224 144 0
w 288 128 224 80 0
p 288 128 288 192 3 0 0 10000000
p 288 192 288 256 3 0 0 10000000
w 288 256 224 208 0
p 288 256 288 320 3 0 0 10000000
w 288 320 224 272 0
I've tried different simulators, I've tried all the ones I've discovered) Everything works differently everywhere and most often it doesn't work at all) Because picoforates quickly lose capacity, but they are not a generator)
I do not know how they should work correctly, and in my opinion no one knows how it works correctly) I'm trying to figure this out.)
If you look closely, there is an inversion of values, but it is not cumulative, namely, inverted, inverted back and forth, and you somehow add up these changes) Instead of a landslide leak and overflow, overflow occurs) These values should only decrease, but not increase uncontrollably) There's no way gigavolts of voltage can accumulate there)
At the slowest speed, the voltage first increases in the last three capacitors, and then it affects all of them) And this build-up does not occur immediately, but probably during the drift)
Everything works differently everywhere and most often it doesn't work at all) Because picoforates quickly lose capacity, but they are not a generator.
That happens when you don't learn how to use these tools.
I do not know how they should work correctly, and in my opinion no one knows how it works correctly) I'm trying to figure this out.)
What about asking instead of creating silly posts?
What about asking instead of creating silly posts?
Do you think your suggestion is stupid?) Well, I asked, if you insist on it) If you don't consider this performance to be normal, what could be more stupid than that?) In any business, in any program, every little thing is important, I spend decades trying to catch my own gods out of my own programs, and you're talking nonsense) Did you create this place to become dumber or smarter?)
If your application doesn't handle small things correctly, it means it's not capable of performing large tasks correctly, it only confuses, then it's easier for me to solder, rather than look at something I don't understand) You're just wasting my time with your problems)
You don't have to solve your problems) I may not use your app) We'll be even) There is no compulsion, there is a choice, there is a chance, there is no choice, there is no chance)
I was way too optimistic about you...
Let me explain it at your level:
- This program is a tool.
- To use a tool first you need to learn to configure and use it.
- You learn by reading the documentation and/or asking.
- It still can happen that you are not using the proper tool for a task.
In this case, when you configure the program properly it works (within the limitations of this program).
Just try the circuit attached.